Details

colorFabb special filaments

Innovation never stops at colorFabb. Our ever expanding range of special filaments have been industry leading for years. Some of them are for aesthetic purposes, others are pure functionality or for specific niche applications. Materials like woodFill, bronzeFill, XT-CF20, LW-PLA, varioShore TPU and DPA-100 support filament were developed in-house and have been successes ever since. By listening to our customers’ needs and forging strategic partnerships with material OEMs we are able to innovate continuously and bring FDM/FFF 3D printing to the next level.

Please note that most materials have specific printing instructions. Consult the individual article pages for more information.

Specification
Material: 
Colorfabb varioShore TPU
Diameter Tolerance:
± 0.1 mm
Density: 
1,2-1,3 g/cm3
Glass Transition Temperature:
-20C
Printing Advice

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and tricks for using colorFabb 3d printing filament.

Advised 3D printing temperature 
190C-250C
Advised 3d print speed
20-30 mm/s
Advised Heated bed 
20-40C
Cooling fan

Use the least amount of cooling when maximum foaming is required. For better overhang performance use 50-100% cooling.

We advise our community to use standard TPU settings as a base setting for developing your own pre-sets.

Make sure the distance between nozzle and platform is not to small, especially if the material is being foamed while printing, the pressure will need to be released from the hot-end to prevent clogging and feeder issues.

 

Downloads
Support

Do you have any questions and / or comments?

Reply within one working day

Contact information

Message

Reviews

VARIOSHORE TPU RED

We have taken TPU… and made it special by using the same foaming technology we debuted with LW-PLA. Our varioShore TPU has a few main distinctive features: its variable shore hardness, reduced weight and density and soft touch. varioShore TPU allows users to vary the density of the material by adjusting temperature and material throughput (speed & layerheight). At temperatures between 200 and 250C the materials will start to expand to roughly 1.4-1.6 times its original volume, which reduces the density to 0.7 to 0.9 g/cm³. This means the material can be printed at low flow rates (60-70%), to compensate the active foaming, which in return gives very soft printed parts. Between 190-200C the material can be printed without foaming, resulting in different haptics and harder prints compared to foamed samples.

From shore hardness 92A(unfoamed) to shore 55A (maximum foamed).

Developed in co-operation with Lubrizol, varioShore TPU is a material ideally suited for printing insoles and cosplay parts for instance.

Please note that color variations may occur. Color will turn lighter when material is at maximum foamed state as opposed to non-foamed state which shows a deeper and richer color.

  • Light Weight
  • Soft Touch
  • Prosthetics
Colors
from $51.52
In stock
Only %1 left
SKU
060006
In Stock: make selection
Back to top