Details

colorFabb LW-PLA

Pros

Reduce the weight of printed parts up to 65% compared to regular PLA.

Control extruded volume of material by regulating printing temperature. At around 230C LW-PLA starts foaming and can increase its volume by nearly 3 times.

With one spool LW-PLA you can print as much as with 3 regular spools of PLA, due to the 3x lower material multiplier / flow.

Easy to cut, trim, sand and takes paint really well.

LW-PLA  (Natural,Black,Gray Silver & Red) hides layer lines really well.

Cons
 Material oozes on travelmoves, this is normal and can’t be reduced completely.

 Color will turn lighter when material is at maximum foamed state as opposed to non-foamed state which shows a deeper and richer color.

This is what our customer are saying about this material:
-“…Must have material for RC planes! Light, easy to print, can cut and trim, too”
-"...LW-PLA, it’s perhaps the most ingenious 3D printer filament on the market."
-“…So far I have used this for cosplay and the weight reduction is amazing”
-“...This filament creates strong, lightweight parts with great surface finish and it sands very well (better than normal PLA)”
-“…I've been using this filament for various decorative prints to be worn, and the weight reduction is a real advantage!”
-..”Ideal for Drone replacement parts”

Specification
Material: 
colorFabb LW-PLA
Diameter Tolerance:
± 0.1 mm
Density: 

1.210-1.430 g·cm-3 (non activated density)

0.403 – 0,476 g·cm-3 (maximum activated density)

Glass Transition Temperature:
55C
Printing Advice

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and tricks for using colorFabb 3d printing filament.

Advised 3D printing temperature 
195-260C
Advised 3d print speed
40 - 100 mm/s
Advised Heated bed 

(if you have one, not strictly necessary):

50-60C

Cooling fan

-

 

Downloads
Support

Do you have any questions and / or comments?

Reply within one working day

Contact information

Message

Reviews

LW-PLA YELLOW

Our yellow Light weight PLA (LW-PLA) is the best filament for printing RC Planes, Cosplay and other light weight items. Parts are feather light, yet retain good strength and are easy to cut, trim and sand. If part weight matters to you, then this is your filament of choice.

Read our tutorial: How to print with LW-PLA

Watch this video: Video CNC kitchen

  • Light Weight
  • RC Planes
  • Matte Finish
Colors
from $30.24
In stock
Only %1 left
SKU
030021
In Stock: make selection
Back to top